Oppo Reno 8 Display Available In Bd
DISPLAY | Type | AMOLED, 90Hz, 430 nits (typ), 600 nits (HBM), 800 nits (peak) |
---|---|---|
Size | 6.4 inches, 98.9 cm2 (~83.9% screen-to-body ratio) | |
Resolution | 1080 x 2400 pixels, 20:9 ratio (~411 ppi density) | |
Protection | Corning Gorilla Glass 5 |
Tips for Installation:-
Please test the function of the item before installation
Do not destroy the socket or damage nearby components on the board
The screws are of different sizes. Not to over-tighten or force them.
1. Before installing the display, the display should be checked without tearing or opening the poly paper. If any problem or defect is found, contact NurTelecom without installing the display.
2. Check the top and bottom sides of the display without removing any sediment, if you think there is no defect then apply it and if you find an error then do not apply it.
3. Be careful while installing the display so as not to damage your display.
4. Before installing the display, if you think everything is fine, then remove the poly or sticker and apply it after being 100% sure.
5. Tearing or removing any kind of sand or paper on both sides of the display will void the warranty.
6. Any kind of sweat or glue on the display will void the warranty.
7. Install the display after being 100% sure whether the original color of the display or the touch works properly.
Nayem –
Original display pelam thanks
Nayem –
Dhruvo –
OPPO RENO 8 DISPLAY TA ORIGINAL QUALITY CHILO
Dhruvo –
Kalam –
service was good
Kalam –